Vinwebs

Store
Cart Your Cart $0.00  |  0 items View Cart Checkout


 

Jettec Epson Inkjet Ink Cartridge Chip Ink Level Resetter

Jettec Epson Inkjet Ink Cartridge Chip Ink Level Resetter BRAND NEW SEALED

 

Jet Tec Ink Level Resetter is required for some Epson cartridges that contain 'Intellidge' Chips. The Ink Level Resetter will

Reprogram the Intellidge

Chip to show a full ink level once the cartridge has been refilled. The resetter kit is required when refilling the following

Epson printer cartridges:

Epson Stylus Colour: C32, C42, C42Plus, C42S, C42SX, C42UX, C44, C41, C43, C43UX, C46, C50, C60, C61, C62, CX3200, 680, 685, 777, 777i, 780, 785EPX, 790, 795, C70, C70Plus, C80, C80N, C80WN, C90, C90Plus.

Epson Photo: D68, 915, 925, 935, 810, 830, 830U, 870, 870LE, 875DC, 890, 900, 1270, 1280, 1290, 1290S, 2000P, 950, 960, 2100, 2200

The OEM Cartridges in the following printers can be reset with a Resetter to use up all the ink, but once they become empty, they cannot be refilled. We sell Compatible

 

Cartridges for these printers that can be refilled:

Epson Stylus Colour: C63, C64, C66, C82, C84, C86, C86Photo, RX420, RX425, RX500, RX510, RX520, RX600, CX5200, CX5300, CX5400, CX6400, CX6600

Epson Photo: R200, R210, R300, R310, R320, RX620,

Epson Stylus: CX3600, CX3650, CX4600, DX3800,

Epson Stylus Colour/All in One: CX5100

Epson Stylus: C42, C44, C60, C62, C64, C70, C80, C82, C84

How to use the Resetter

Before refilling all Epson chipped cartridges:

Hold the Resetter so that the two (green & red) lights are facing upwards.

Turn the cartridge upside down so that the outlet holes are also facing upwards.

Locate the cartridge into the appropriate slots of the Resetter. This should locate the prongs from the Resetter against the chip. (You will need to use

the L shape lug, which detaches from the Resetter for the C70, C80, C82 & 5200).

Push the cartridge and the Resetter together.

Both lights will flash once simultaneously, then the green light will flash five times to show that chip is reprogrammed.

If the red light flashes it may mean either, the prongs are not in line with the chip, or the cartridge you are reprogramming is not an original Epson or

a Cartridge SAVE Compatible.

You may now proceed with refilling your cartridge as per instructions in your refill kit.

$2.00